| Notes | 1. Due to our manufacturing process, point to point dimensions may not meet the ANSI B18.6.3-1972 (R1991) standard.
2. * #0-80 and No. 0 dimensions are actual. All other ceramic fasteners conform to ANSI B18.6.3-1972 R1991 standards as listed in the chart.
3. All ceramic screws and ceramic bolts are fully threaded.
4. All dimensions shown are in inches.
|
|
Dimensional Specifications - Flat Head, Phillips
|
Flat Head Phillips Fastener Dimensions Per ANSI B18.6.3-1972 (R1991) Standard
|
| Size |
Head Diameter
|
Head Height
|
| #0-80 |
.099 - .119 |
.035 |
| #2-56 |
.147 - .172 |
.051 |
| #4-40 |
.195 - .225 |
.067 |
| #5-40 |
.220 - .252 |
.075 |
| #6-32 |
.244 - .279 |
.083 |
| #8-32 |
.292 - .332 |
.100 |
| #10-32 and #10-24 |
.340 - .385 |
.116 |
| 1/4"-20 |
.452 - .507 |
.153 |
| 5/16"-18 |
.568 - .635 |
.191 |
| 3/8"- 16 |
.685 - .762 |
.230 |
Please note: Head has 80° to 82° included angle
|
| |
© 2010 Ceramco, Inc., all rights
reserved.
P.O. Box 300, 1467 East Main Street, Center Conway, NH 03813
Tel: (603) 447-2090 | Fax: (603) 447-3906
|
