| Notes | 1. The pitch diameter of male threads will not exceed the max allowable according to Class 2. Minimum allowable pitch diameter may be below that of Class 2, conversely for female threads. Due to shrink factor variances, the stack up tolerance cannot be controlled on the pitch. It is recommended that you not engage more than 5 to 10 threads on any male fastener.
2. No warranty with respect to torque strength and tensile strength is extended or implied. Ceramic materials are inherently brittle and display catastrophic failure if impacted or stressed beyond material limits.
|
|
Zirconia (ZrO2) Machine Screws, Bolts, Nuts, and Washers
We manufacture ceramic fasteners out of Partially Stabilized Zirconia (PSZ) material for when toughness and other unique properties are needed in your application.
|
Zirconia (PSZ) Fasteners, Size x Maximum Length
|
| #2-56 x 0.25" |
M2 x 10mm
|
|
#4-40 x 1.0"
|
M3 x 25mm
|
|
#6-32 x 1.0"
|
M4 x 30mm |
|
#8-32 x 1.25"
|
M5 x 40mm
|
|
#10-32 x 1.5"
|
M6 x 50mm
|
|
|
|
- The above listed ceramic screw/bolt sizes have matching ceramic washers and ceramic nuts
- A variety of head styles are available, we consider hex head to be the default if not specified
- Please call (603) 447-2090 or email to enquire for pricing and delivery time on larger quantities.
|
| |
© 2010 Ceramco, Inc., all rights
reserved.
P.O. Box 300, 1467 East Main Street, Center Conway, NH 03813
Tel: (603) 447-2090 | Fax: (603) 447-3906
|
